Custom Dog Brace - 1" inch Replacement Straps

$7.00

Details

Instructions

Details

RELAX! WE CUSTOMIZE YOUR STRAPS SO YOU DON'T HAVE TO STRESS ABOUT IT.

We provide a strap cut to length based on your measurements.
We hole punch your straps so you don't need to buy a hole punch and worry about hole placement.
We send brand new components with your straps.

HOW TO ORDER

Be sure to measure your strap length, prior to ordering. Unhook the strap and lay flat. Then measure the full length of the strap.
Enter this measurement in the field, and a standard size will be chosen based on the length you've provided.
We will trim the strap to the length you've provided before shipment.

items included with your straps

Screw & Washer

Every strap comes with a new pair of screw and washer. We do not recommend reusing the old screws and washers.

Barrel Nut

Every strap comes with a new barrel nut. We do not recommend reusing the old barrel nut.

vibra-tite

Vibra-tite is used on our braces as a threadlocker to keep the screws in place.

replacing straps just not your favorite thing?

REFURB SERVICE

Instructions

TOOLS NEEDED

Locking Pliers

You will need this to remove the barrel nuts from your dog's brace

Phillips Screw Driver

You will need this to unscrew the screws from the brace strap and the metal loop holder.

power drill (optional)

We typically will add loctite to secure the barrel nut and to prevent migration. If the nuts and the screw are difficult to remove, then we recommend using a power drill

DIRECTIONS

STRAP REMOVAL

1. Starting from the bottom strap, use a locking pliers to secure the barrel nut from the inside of the brace and remove the screw with a Phillips head screwdriver.

2. With the locking pliers attached to the barrel nut, begin wiggling the nut back and forth until it comes loose. If the barrel nut is difficult to remove, we recommend using a power drill.

3. Repeat these steps until all the straps and metal d-ring holders are removed.

4. Remove the D-ring from the old strap and set aside to reuse on the new straps.

STRAP ATTACHMENT

1. Begin by inserting the new barrel nut into the hole on the inside shell of the brace.

2. Straps will arrive pre-punched. Slide the metal D-ring onto the strap and Fold the strap back on itself so the holes align with each other and the loop material is facing you.

3. Insert the screw and washer into the hole on the straps and align with the barrel nut.

4. Add a drop of Vibra-Tite inside the barrel nut.

5. Using the Phillips screw driver, screw the washer and screw into the barrel nut.

6. Repeat on all straps.

replacing straps still seems to difficult?

We can do it for you.

REFURB SERVICE

My dog is running with her brace

Great support and really made a difference in my 14 years old border collie daily life. It took few weeks for her to get used to it. She tried and learned to undo the strap and had relight them. After almost a year I just had to replace bottom strap as she managed to loose it outside. I asked for replacement and got it right away from aoc. It was a great and best solution to her reared tcl.

Hi Frank,
Thank you for sharing how well your dog is doing. I am so glad to hear your dog is taking so well to the brace. Appreciate you taking the time to write us a review.

Best,
Animal Ortho Care